- 1 What is the best carburetor for a 383 stroker?
- 2 What is the average horsepower of a 383 stroker?
- 3 What size carburetor do I need for a stock 350?
- 4 How much horsepower will a 650 cfm carb support?
- 5 What happens if your carburetor is too big?
- 6 Are carb spacers worth it?
- 7 Are stroker engines reliable?
- 8 What is the strongest Chevy engine?
- 9 Is a 383 stroker worth it?
- 10 How much horsepower does a carburetor add?
- 11 How do I choose a carburetor size?
- 12 What size carburetor do I need for a 360?
- 13 How do I know what cfm carb I need?
- 14 Can you put a carb on a Vortec 350?
- 15 Will a bigger carb make my bike faster?
What is the best carburetor for a 383 stroker?
Best Carburetors for 383 Stroker
- Holley 0-80457sa 600 CFM Four-Barrel Street Carburetor.
- Edelbrock 1405 Carburetor.
- Edelbrock 1406 Performer 600 CFM 4-Barrel Carburetor.
- Holley 0-80738C Model 4150 650 CFM Four-Barrel Street Carburetor.
- Quick Fuel Technology SS-750-AN 750 CFM Street Carburetor.
What is the average horsepower of a 383 stroker?
The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.
What size carburetor do I need for a stock 350?
A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.
How much horsepower will a 650 cfm carb support?
So, using your Google-Fu you type “How much power can a 650 cfm carb support?” Well, chances are that you’ll get answers in the 450-470 hp range, but that’s not really the right way to look at it.
What happens if your carburetor is too big?
If the barrels are too big, the loss of air velocity means the cylinder will not fill to its full capacity. An engine with a carb that is too big will put out less Torque and Horsepower. It will be difficult to drive due to poor low-end torque. If you drag race your car, an oversized carb will produce slow 60 ft.
Are carb spacers worth it?
Spacers are said to improve air/fuel vaporization through and out of the carburetor. Anytime the air/fuel charge has to turn sharply coming off the carb, it increases the chance of separating the fuel from the air.
Are stroker engines reliable?
A few years ago stroker motors weren’t very reliable but with testing and redesigning now they are almost as reliable as a stock motor as long as you treat them right.
What is the strongest Chevy engine?
Our fastest crate engine ever As the power behind the 2019 Corvette ZR1, the new supercharged 6.2L LT5 represents the pinnacle of Chevrolet’s performance: It’s the most powerful engine ever offered in a Chevy production vehicle.
Is a 383 stroker worth it?
Well-worth it for the added low-end torque, a mild 383 build is less than $200 more to put together than a 350. They’re so common now it seems hardly anyone builds up a 350 block without putting in a 3.75″ stroke crank.
How much horsepower does a carburetor add?
After you fix what’s limiting performance, an Edelbrock Performer intake can add as much as 10 HP. The FAQ forum is a good place to ask questions. There are differences between engines and performance improvements.
How do I choose a carburetor size?
To arrive at the most appropriate carburetor choice, there’s a basic formula: engine displacement multiplied by maximum rpm divided by 3,456. For example: a typical 355ci small-block—a 0.030-over rebuild—with a 6,000-rpm max engine speed would work well with a 616-cfm carb ((355 x 6,000) 3,456 = 616.32).
What size carburetor do I need for a 360?
If the engine is mostly stock the 600 – 625 cfm should be fine. If the engine is hot rodded, and you race it, then a 750 cfm would give you slightly more power.
How do I know what cfm carb I need?
The volumetric efficiency of the engines is a measurable value, and with an adequate carburetor will get the most efficiency out of the engine. The formula to calculate the amount of CFM (cube feet per minute) that a motor needs is CFM= Cubic Inches x RPM x Volumetric Performance ÷ 3456.
Can you put a carb on a Vortec 350?
You can use a carb intake for vortec heads, just get an intake made for vortec heads. A regular chevy distributor will drop right in. Chances are you’ll need to run an electric fuel pump since your block is likely not drilled for a fuel pump pushrod.
Will a bigger carb make my bike faster?
A bigger carburetor alone will not make your bike go faster. In most cases, your bike won’t even start or idle roughly with a carburetor that’s too big. For more power, you should look into a full system performance exhaust and rejetting your carb (not replacing it entirely).