What Carburetor Came Stock On An ’83 F250 With A 460?

How much horsepower does a fuel injected 460 have?

General Information. The Ford 460-cubic-inch, V8 engine has a cylinder bore of 4.36 inches and a crankshaft stroke of 3.85 inches. The output for 460 engines built before 1972 is 365 horsepower at 4,600 rpm and 485 pound-feet of torque at 2,800 rpm.

How long will a Ford 460 engine last?

However a 460 can last past 125k. Just make sure to keep it tuned regurally and use good oil. I’ve seen 454’s with over 150k still going strong. Big motors like the 460 weren’t meant to go 2-300k, but they can if properly cared for.

When did Ford stop making the 460?

1978 marked the final year of the 460 in Ford and Lincoln-Mercury full-size cars, coinciding with their downsizing.

What is the difference between a Holley 4150 and 4160 carburetor?

These two are very similar with the primary difference that the 4150 uses a thick metering block in both the primary and secondary while the 4160 is shorter in length and uses a thin, metering plate on the secondary side.

You might be interested:  Question: How To Adjust A Dual Motorcycle Carburetor?

How many miles per gallon does a Ford 460 get?

14.3 mpg on the highway, 10-12 in town, anywhere from 7-12mpg while towing depending on load.

How much can a 460 pull?

A 2020 Lexus GX 460 can tow up to 6,500 pounds, meaning it can tow less than 6,000 pounds of dry weight. Many boats can be towed by a Lexus GX 460, including PWCs (or personal watercraft, small sailboats, ski boats, small cabin cruisers, small speed boats, pontoon boats, and small fishing boats.

How much horsepower does a 429 Cobra Jet engine have?

The ’71 429 Cobra Jet hit the option sheet with an aggressive flat-tappet hydraulic cam, stamped bolt/fulcrum rockers, 715-cfm Rochester Quadrajet carburetion, dual-plane “spread-bore” iron manifold, four-bolt main block, and large-port cylinder heads to make a factory rated 370 horsepower and 450 lb-ft of torque.

Does Ford still make a 460 engine?

Today, the 460 V8 sits as one of Ford’s best kept secrets. While the 5.0 small block might get most of the attention, followed by its modern Coyote cousin, this big block has a lot to offer project builders seeking something different.

How far can you bore a 460 Ford?

Some 429/460 blocks can go. 060″, some can go. 080″, and some have been known to go 4.500″ bore (0.140″ over).

How many liters is the Ford 460 engine?

For many years the 454 (7.4-liter) V8 was the top choice from GM, while Ford had the mighty 460 ( 7.5-liter ) V8.

How fast is 460 horsepower?

The 2018 Ford Mustang GT Has 460 HP, Hits 60 MPH in Under 4.0 Seconds. When equipped with a 10-speed auto and the Performance Package, the new Mustang GT is seriously quick.

You might be interested:  How To Drain Outboard Carburetor For Shipping?

What is the biggest big block Ford makes?

The Ford 385 engine family (the name coming from the 3.85 inch crankshaft stroke of the 460 V8 was the Ford Motor Company’s final big block V8 engine design, replacing the Ford MEL engine and gradually superseding the Ford FE engine family.

What is the biggest motor Ford makes?

Ford just announced a brand-new V8 for the F-250 and F-350 Super Duty truck lines—and at 7.3 liters, this pushrod V8 is the largest displacement engine available in any new pickup truck today.

Leave a Reply

Your email address will not be published. Required fields are marked *