Readers ask: Where Is The Model Number On A Briggs And Stratton Carburetor?

How do you read a Briggs model number?

If you need to find your Briggs & Stratton engine information we can help! The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.

What do the numbers on a Briggs and Stratton engine mean?

The first digit after the displacement indicates the BASIC DESIGN SERIES, relating to cylinder construction, ignition, general configuration, etc. C. The second digit after the displacement indicates ORIENTATION OF CRANKSHAFT. The last digit indicates the TYPE OF STARTER.

How do I tell what year my Briggs and Stratton engine is?

How can I determine the age of my engine if it was made after 1965?

  1. The first two digits (99) denote the year of manufacture.
  2. The next two digits (01) are the month of the year, which is January.
  3. The following two digits (15) are the day of the month.
  4. The final two digits designate the plant and assembly line.
You might be interested:  Carter Afb Carburetor, Why Would The Secondaries Not Close?

How do I find out my engine model?

Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes. Just tell the store clerk those two characters and you’re in business.

How do I tell what model my Briggs and Stratton engine is?

How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.

How can I tell what HP My Briggs and Stratton engine is?

Where can I find my Briggs & Stratton engine’s horsepower or torque rating?

  1. You can find the gross horsepower or torque value labeled on your engine.
  2. To find an engine’s horsepower, look for a number with “HP” or “cc.”

How do you read engine serial numbers?

Your serial number is located on your engine plate, often located on the left-hand side of the engine. Typically the first letters and numbers will identify the engine, for example, DJ51279, to find all the parts we have online for your engine.

How do I contact Briggs and Stratton?

You can contact our Customer Support team M-F from 8 a.m. – 5 p.m. CT via the following numbers: 800-743-4115 (pressure washers & portable generators) or 800-732-2989 (standby generators).

You might be interested:  Readers ask: How To Identify What Brand Carburetor Is On My Briggs And Stratton Model 31c707 17hp Engine?

Where is the date code on a Briggs & Stratton engine?

The code is stamped directly into the metal of a Briggs & Stratton engine. Collectors of antique engines often jump past the model and type numbers to read the date code first. Wipe any grease and grime away from the code stamp with a cloth or moist towelette. Use a magnifying glass to see the numbers clearly.

How do I find the manufacture date of my engine?

Locate the engraved serial number on the side of the crank case. The Date of Manufacture (DOM) indicator may be found within the engine’s serial number. Locate the first four digits (all numbers) of the serial number.

How can I tell how old my lawnmower is?

By locating the serial number tag on your machine, you can easily determine your mower’s age. If you have the owner’s manual for your mower, you can also check the date printed on the inside of the manual. This date should be one year after the mower’s manufacture date.

Leave a Reply

Your email address will not be published. Required fields are marked *