Readers ask: How To Identify What Brand Carburetor Is On My Briggs And Stratton Model 31c707 17hp Engine?

Where is the serial number on a Briggs and Stratton carburetor?

Briggs & Stratton Engine Identifier The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.

How do I know what carburetor is in my riding mower?

Carburetor Location in Riding Mowers On a riding mower, you will generally find the carburetor on the side of the mower’s engine. Similar to a walk-behind mower, the carb is located below or behind the air filter. You’ll have to remove the filter and the air filter housing to access it.

How do you read a B&S model number?

If you need to find your Briggs & Stratton engine information we can help! The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.

You might be interested:  Often asked: What Causes Carburetor Dieseling?

What is code date on Briggs and Stratton?

The engine’s code number indicates the exact date it was manufactured. This system provides an easy way to determine the age of your small engine. The following is an example of interpreting the date for the code number 99011556: The first two digits (99) denote the year of manufacture.

Are all Briggs and Stratton carburetors the same?

Briggs & Stratton Genuine Carburetors Not only are Briggs & Stratton genuine parts assured to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Where is the carburetor number located?

The list number is stamped on your carburetor, either on the corner of the airhorn or choke tower or, if it doesn’t have an airhorn, on the mainbody. Remove the carburetor from your vehicle before looking for the list number to easily find the information you need.

How do I find out my engine model?

Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes. Just tell the store clerk those two characters and you’re in business.

How do I find my engine serial number?

Your serial number is located on your engine plate, often located on the left-hand side of the engine. Typically the first letters and numbers will identify the engine, for example, DJ51279, to find all the parts we have online for your engine.

You might be interested:  Readers ask: How To Identify What Brand Carburetor Is On A Briggs & Stratton?

How do you clean a carburetor without removing it?

Spray liberally with carb cleaner – trying to direct the cleaner into the jets – and leave to soak for a few minutes. Use an air line (or a can of pressurised air, sold as an ‘air duster’) to blow through the jets. Repeat the previous step and this one until you can see no more gunge.

How do you clean a carburetor on a riding lawn mower without removing it?

However, you can not spray the carburetor when the engine is off since it cannot do the cleaning without being propelled. All you need to do is to start the engine and spray directly at the center of the carburetor while it is running. Any deposits clogging in the carburetor will easily be removed.

How do you adjust a carburetor on a riding lawn mower?

Set the throttle to fast and start the mower engine. Turn the high speed screw first clockwise until the engine slows, then counterclockwise until it slows. Locate the center point where the engine idles best. Move the throttle from slow to fast then back to slow to test the adjustment.

What determines the selection of engine shaft orientation?

When engineers choose an engine, they decide on crankshaft orientation based on what makes the most sense to power the equipment. The only time you’ll likely have a choice between vertical and horizontal shaft engines is when you buy a riding mower.

How do I contact Briggs and Stratton?

You can contact our Customer Support team M-F from 8 a.m. – 5 p.m. CT via the following numbers: 800-743-4115 (pressure washers & portable generators) or 800-732-2989 (standby generators).

Leave a Reply

Your email address will not be published. Required fields are marked *