Readers ask: How To Identify A Holley Carburetor Model?

What do the numbers on a Holley carb mean?

The first three numbers indicate the day of the year; the last digit, the year of manufacture. Here, “2889” indicates a carb made on the 288th day (which falls in the month of October), of a year ending in 9 (1969, 1979, 1989, 1999, etc.).

How do I know what carburetor I have?

The list number is stamped on your carburetor, either on the corner of the airhorn or choke tower or, if it doesn’t have an airhorn, on the mainbody. Remove the carburetor from your vehicle before looking for the list number to easily find the information you need.

How do you read the date code on a Holley carburetor?

Decoding them is as follows:

  1. Three Digit – Example 763 > 7 – Year (1967), 6 – Month (June), 3 – (Third Week)
  2. Four Digit – Example 0798 > 079- Day of Year (would land in March), 8 – 1978/1988/1998/2008.

How do I know what CFM my Holley carb is?

Will a bigger carb make more power?

  1. Performance Improvements stocks carbs from Holley Performance, Edelbrock and Proform Parts.
  2. The formula for calculating how much CFM (cubic feet per minute) your engine requires is: CFM = Cubic Inches x RPM x Volumetric Efficiency ÷ 3456.
You might be interested:  FAQ: How To Clean Carburetor On Outboard Motor?

What’s the difference between Holley 4150 and 4160?

These two are very similar with the primary difference that the 4150 uses a thick metering block in both the primary and secondary while the 4160 is shorter in length and uses a thin, metering plate on the secondary side.

How do I identify my Keihin carburetor?

Find the serial number near the bottom of the CDK carburetor. Write the number down. Call one of the distributors listed on the keihin-us.com website and give them your serial number. Distributors keep track of serial numbers and will be able to identify your particular carburetor.

What size carburetor do I need for a 350?

A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.

What CFM is a Holley 4160?

Holley 0-80457S Model 4160 600 CFM Square Flange 4-Barrel Vacuum Secondary Electric Choke Carburetor.

What is a Holley 3310?

Once described as the small block Chevy of fuel delivery, the Holley 3310 carburetor (4150 and 4160 models) is still the go-to carburetor for anyone building a performance engine. The legendary Holley 3310 was born. The 3310 feeds the Z16 Chevelle’s 396 big block with 780 cfm of air.

Did Holley buy demon?

We reported that BG Fuel Systems and Demon Carburetors were poised for a comeback in a blog earlier this week. The fact that the company was bought by High Performance Industries, the same company that owns Holley, Demon’s biggest competitor, has created a bit of a stir in the automotive aftermarket.

You might be interested:  FAQ: How To Adjust A Carburetor On A Poulan Chainsaw?

What size carburetor do I need for a 360?

If the engine is mostly stock the 600 – 625 cfm should be fine. If the engine is hot rodded, and you race it, then a 750 cfm would give you slightly more power.

What size cfm carb do I need?

The engine’s volumetric efficiency is a measurable value and with a correctly matched carburetor you will receive the best performance possible out of your engine. The formula for calculating how much CFM (cubic feet per minute) an engine requires is: CFM = Cubic Inches x RPM x Volumetric Efficiency ÷ 3456.

Leave a Reply

Your email address will not be published. Required fields are marked *