- 1 How do I identify my Holley carb?
- 2 How do I tell what model my carburetor is?
- 3 What do the numbers on a Holley carb mean?
- 4 What is the difference between a 4150 and a 4160 Holley carburetor?
- 5 How do you read a date code on a Holley?
- 6 How do I identify my Demon carburetor?
- 7 What size carburetor do I need for a 350?
- 8 How do I know what Weber carb I have?
- 9 What CFM is a Holley 4160?
- 10 Did Holley buy demon?
- 11 How many CFM is a Holley 4150?
- 12 Does Holley make a 750 spread bore carburetor?
How do I identify my Holley carb?
It’s like a “VIN” for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it. The date code will be right below it.
How do I tell what model my carburetor is?
The list number is stamped on your carburetor, either on the corner of the airhorn or choke tower or, if it doesn’t have an airhorn, on the mainbody. Remove the carburetor from your vehicle before looking for the list number to easily find the information you need.
What do the numbers on a Holley carb mean?
The first three numbers indicate the day of the year; the last digit, the year of manufacture. Here, “2889” indicates a carb made on the 288th day (which falls in the month of October), of a year ending in 9 (1969, 1979, 1989, 1999, etc.).
What is the difference between a 4150 and a 4160 Holley carburetor?
These two are very similar with the primary difference that the 4150 uses a thick metering block in both the primary and secondary while the 4160 is shorter in length and uses a thin, metering plate on the secondary side.
How do you read a date code on a Holley?
Moving on, 0798 is our date code; Holley used a three digit up to 1973, after which they moved to the four digit code you see here. Decoding them is as follows: Three Digit – Example 763 > 7 – Year (1967), 6 – Month (June), 3 – (Third Week)
How do I identify my Demon carburetor?
You have a 575 size demon carburetor if it comes with a 6 digit and annular venturi. If it has the downleg venturi, it is a 650 size. You have a 700 size demon carburetor if it comes with a 7 digit and annular venturi. If it has the downleg venturi, it is a 750 size.
What size carburetor do I need for a 350?
A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.
How do I know what Weber carb I have?
Weber model numbers are always stamped on the carburetor body. They always begin with a 2-digit number (or a pair of 2-digit numbers separated by a slash) followed by three or four letters. There may or may not be more numbers and/or letters after that.
What CFM is a Holley 4160?
Holley 0-80457S Model 4160 600 CFM Square Flange 4-Barrel Vacuum Secondary Electric Choke Carburetor.
Did Holley buy demon?
We reported that BG Fuel Systems and Demon Carburetors were poised for a comeback in a blog earlier this week. The fact that the company was bought by High Performance Industries, the same company that owns Holley, Demon’s biggest competitor, has created a bit of a stir in the automotive aftermarket.
How many CFM is a Holley 4150?
Holley 830 cfm 4150 HP Carburetor Kit Includes 830 CFM Carb.
Does Holley make a 750 spread bore carburetor?
Holley Ultra Double Pumper 750 cfm Spread Bore 4BBL Carburetor.