What year did they stop making Stihl 044?
The years listed for the 044 are 1988-2001.
Does Stihl use Walbro carburetors?
Stihl 024 Complete Carburetor. This is an original Walbro carburetor that fits Stihl 024 chainsaws. OEM No. WT-194-1.
How many cc’s does a Stihl 044 have?
The Stihl 044 chain saw has a single cylinder, two-stroke engine with a 70.7 cubic centimeter displacement. A 70.7 cc engine is equivalent to 4.31 cubic inches. The engine runs on a gasoline and oil mixture that is 50 parts gas to 1 part oil.
How old is Stihl 044?
1988: Catalytic converter for chainsaws STIHL develops the world’s first catalytic converter for two-stroke engines. It reduces hazardous hydrocarbons in the exhaust gas by 70 to 80 per cent. The STIHL 044 C, the first chainsaw with a catalytic converter, is launched in 1989.
How do you adjust the carburetor on a Stihl chainsaw?
They are the high-speed, low-speed and idle adjustments respectively. Determine the carburetor type before adjusting the high- and low-speed screws. To do this, turn the “L” screw clockwise as far as it will go, using a flat-head screwdriver, then turn it counterclockwise as far as it will go.
Is Stihl an American company?
listen), German: [ʃtiːl]) is a German manufacturer of chainsaws and other handheld power equipment including trimmers and blowers. Their headquarters are in Waiblingen, Baden-Württemberg, near Stuttgart, Germany. Stihl was founded in 1926 by Andreas Stihl, an important innovator in early chain saw production.
Where is the number on Stihl carburetor?
As per the picture, the one set of numbers can be found just above the carburetor fuel adjustment screws. The other set of numbers will be located on the other side of the carburetor. Clean the area around the numbers well as sometimes the numbers may be poorly stamped or have filled in with dirt.
How many cc is a Stihl 038?
According to Andreas Stihl Co., the basic 038 S model’s single-cylinder, two-stroke engine was rated at 3.3 kilowatts, or 4.43 U.S. horsepower, from its 4.07-cubic-inch displacement. It had a 1.97-inch bore and 1.34-inch stroke.