Question: 350bt Husqvarna How To Adjust Carburetor?

How do you adjust a blower carburetor?

How to Adjust the Carb on a Homelite Blower

  1. Place the blower on a flat workbench. Locate the three adjustment screws found on the side of the carburetor, just below the air filter.
  2. Turn the “L” screw clockwise until the screw seats with the screwdriver.
  3. Turn the “H” screw clockwise until the screw seats.
  4. Rev the engine.

How do you adjust the throttle on a Husqvarna?

Tip

  1. Locate the idle-speed screw and the idle-mixture screws on the side of the chainsaw.
  2. Turn both the low- and high-speed screws clockwise to the midpoint.
  3. Adjust the low-idle screw clockwise and counterclockwise respectively, until you find the highest idling speed.

How do you adjust a high and low carburetor?

Locate the two fuel-adjustment screws on the side of the carburetor. One will be labeled “Hi” and the other “Lo.” The “Hi” screw regulates the engine at full throttle and the “Lo” regulates the fuel when the engine is idling.

What does the T mean on a Husqvarna chainsaw?

A well tuned saw is a happy saw. Tune a Husqvarna chainsaw regularly to ensure good performance and prevent damage caused by an irregular engine. The third screw, which is often labeled as a “T,” is used for setting the idle speed when the saw is running, but has no throttle applied.

You might be interested:  FAQ: Where Is The Carburetor On A Mtd Snowblower?

Why does my leaf blower bog down when I give it gas?

A dirty air filter is one of the most common causes behind a leaf blower that is bogging down: the air is enough for the engine to idle, but as soon as you switch to full-throttle, the machine will stall. All we need to do is replace the air filter. To do this, start by opening the air filter cover.

Why does my Craftsman leaf blower won’t stay running?

A clogged carburetor is most commonly caused by leaving fuel in the leaf blower for a long period of time. This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner.

Leave a Reply

Your email address will not be published. Required fields are marked *