- 1 Is a Quadrajet worth rebuilding?
- 2 Are Quadrajet carburetors any good?
- 3 What carbs replace Quadrajet?
- 4 How hard is it to rebuild a carburetor?
- 5 How do I identify my Rochester Quadrajet carburetor?
- 6 What is a Quadrajet carburetor?
- 7 What CFM is a quadrajet carb?
- 8 What is a divorced choke quadrajet?
- 9 Does Edelbrock make quadrajet?
Is a Quadrajet worth rebuilding?
A full and in-depth article of the rebuild process that Jet Performance takes with a Q-Jet Carburetor, by Dragzine.
Are Quadrajet carburetors any good?
The truth is, a properly tuned Quadrajet can be just as efficient and reliable as a bolt-on substitute performance carburetor. The Quadrajet has many model designations; the most adaptable units were designated as 4M, 4MC and 4MV, and most were rated at 750cfm until 1972 when their rating was increased to 800cfm.
What carbs replace Quadrajet?
New Holley Sniper EFI is Direct Replacement for Q-Jet Carb. Holley/MSD is thrilled to announce the release of Sniper EFI Systems for Quadrajet applications, which eliminate the need to continually rebuild 50-plus-year-old Quadrajet carburetors on classic Chevys, Pontiacs, Buicks, Oldsmobiles, and GMCs.
How hard is it to rebuild a carburetor?
While a carburetor is not particularly difficult to rebuild, there are many performance enthusiasts who shy away at the thought of disassembling and rebuilding, often choosing to simply buy a replacement instead. A carb kit will include the typical wear components, as well as new gaskets and seals.
How do I identify my Rochester Quadrajet carburetor?
All Rochester Quadrajet carburetors are identified by a seven- or eight-digit GM part number. On units made before mid-1968, the part number was stamped around the outside edge of a round metal tag attached to the fuel bowl.
What is a Quadrajet carburetor?
The Quadrajet is a “spread bore” carburetor; the primary venturis are much smaller than the secondary venturis. Most Quadrajets use a vacuum operated piston to move the primary metering rods to control the air-fuel ratio, allowing the mixture to be lean under low load conditions and rich during high load conditions.
What CFM is a quadrajet carb?
Quadrajets can range anywhere in between 600 and 800 CFM. Most are rated 750 CFM or higher. Quadrajets are used by many GM street car enthusiasts; however, they are also disliked by just about as many.
What is a divorced choke quadrajet?
PHOTO 3 A divorced choke uses a spring housing that is separate from the carburetor body. Some Rochester Quadrajet carburetors employed a divorced choke spring that is very sensitive to intake manifold heat to open the butterfly.
Does Edelbrock make quadrajet?
Edelbrock.com: New Carburetors – Quadrajet Rebuild Kit Jet Spacer Hose Pump.