How do you adjust a blower carburetor?
How to Adjust the Carb on a Homelite Blower
- Place the blower on a flat workbench. Locate the three adjustment screws found on the side of the carburetor, just below the air filter.
- Turn the “L” screw clockwise until the screw seats with the screwdriver.
- Turn the “H” screw clockwise until the screw seats.
- Rev the engine.
How do you adjust the idle on a leaf blower?
Start the blower engine, and allow the leaf blower to run at high idle for one minute. Turn the throttle lever down to the slow position, and allow the leaf blower to idle. If the blower shuts off, turn the idle screw 1/8 turn clockwise with a flathead screwdriver. Start the engine, and allow the engine to idle.
Why does my leaf blower dies when I give it gas?
If the air filter in your leaf blower is partially plugged, it can cause your engine to run, but die at full throttle. The air filter is designed to prevent debris from entering the engine, and over time this debris can accumulate and lead to a clog. A clogged air filter may cause your blower to idle roughly as well.
Why does my Craftsman leaf blower won’t stay running?
A clogged carburetor is most commonly caused by leaving fuel in the leaf blower for a long period of time. This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner.
How do you adjust a small engine carburetor?
Turn the high speed or main jet screw clockwise until the engine begins to slow. Then, turn the screw the other way until the engine begins to slow. Turn the screw back to the midpoint. Once adjusted, check engine acceleration by moving the throttle from idle to fast.
Which Stihl blowers are 4 mix?
Equipped with a high-powered, large displacement STIHL 4-MIX® engine, the BR 500 and BR 550 backpack blowers will impress you with their superior blowing power. Truly the next generation of STIHL backpack blowers, the BR 500 and BR 550 feature an impressive combination of power and fuel efficiency.