FAQ: How To Identify Edelbrock Carburetor?

How do I know what Edelbrock carb I have?

To locate and identify your Edelbrock carburetor the number is stamped into the front lower left hand corner of the carb where the mounting stud is. All of these parts are available on our website as well as more Edelbrock carburetor tuning parts. Carb numbers.

What’s the difference between a 1405 and 1406 Edelbrock carburetor?

The 1405 is aimed more at performance and the 1406 is aimed more at economy and street manners. Yep, but a little tuning and either can be better than they come from the factory.

What size is a 1405 Edelbrock carb?

Edelbrock’s 1405-model carburetor has a primary main jet that measures 0.100 inches, and a secondary main jet that measures 0.095 inches. The primary metering rod measures 0.070 by 0.047 inches, and the needle and seat measure 0.0935 inches.

Is an Edelbrock 1406 square bore?

The Edelbrock 1406 has an electric choke and mates to your intake manifold with a square bore flange. The silver finish and single inlet design is also part of Edelbrock’s legendary two-piece, all-aluminum constructed carburetor.

What cfm carb do I need for a 350?

A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.

You might be interested:  Often asked: Where Is The Carburetor On A Toro 6.75 Lawn Mower?

Is Holley better than Edelbrock?

Significantly lower gas mileage compared to any of the Edelbrock carbs. As a whole, here are a few benefits Holley can boast about: Smoother acceleration than Edelbrock. Fares better with more in-depth tuning.

How many CFM is a 1406 Edelbrock carburetor?

The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.

Are Edelbrock carburetors any good?

The Edelbrock 750 Performer has a reputation as a carburetor that works very well right out of the box. As we will see, our testing generally confirms that belief. To tune this carb, you will need to purchase a kit, but the price is reasonable.

Is Edelbrock a good brand?

As the manufacturer of carburetors, camshafts, cylinder heads, and more, Edelbrock has built a trusted reputation amongst classic car owners across the nation. There’s a reason the company calls itself ” the most respected name in performance.”

Can I put a square bore carb on a spread bore intake?

You can use a square bore carb on an after market spread bore manifold with a shim adapter plate. The shim will reduce the chances of a vacuum leak around the secondaries.

Leave a Reply

Your email address will not be published. Required fields are marked *