FAQ: How To Identify An Edelbrock Carburetor?

How do I know what Edelbrock carb I have?

To locate and identify your Edelbrock carburetor the number is stamped into the front lower left hand corner of the carb where the mounting stud is. All of these parts are available on our website as well as more Edelbrock carburetor tuning parts. Carb numbers.

What’s the difference between a 1405 and 1406 Edelbrock carburetor?

The 1405 is aimed more at performance and the 1406 is aimed more at economy and street manners. Yep, but a little tuning and either can be better than they come from the factory.

What size is a Edelbrock 1406?

1406 Specifications The 1406 carburetor has a 0.098-inch primary main jet, and a 0.095-inch secondary main jet. The metering rod measures 0.075 by 0.047 inches. The needle and seat measure 0.0935 inches, while the float height measured 0.4375 inches. The float drop is 1.25 inches, with a 0.25-inch variance.

What cfm carb do I need for a 350?

A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.

You might be interested:  Often asked: How To Take Off Carburetor On 883 Harley Sportster 2002?

Is Edelbrock going out of business?

Edelbrock will be permanently closing its headquarters in Torrance, California, after being based in the state more than 80 years.

How many CFM is a 1406 Edelbrock?

The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.

How much horsepower does a Edelbrock Performer intake add?

After you fix what’s limiting performance, an Edelbrock Performer intake can add as much as 10 HP.

Are Edelbrock carbs any good?

The Edelbrock 750 Performer has a reputation as a carburetor that works very well right out of the box. As we will see, our testing generally confirms that belief. To tune this carb, you will need to purchase a kit, but the price is reasonable.

Why is my Edelbrock carb not getting fuel?

There can be a few things that can cause no pump shot of fuel through the accelerator pump nozzle. Be sure the float level is set to 7/16, if the float level is to low, there will not be enough fuel in the float bowls to fill the accelerator pump well. If float is to low see adjust float procedure.

Is Edelbrock a good brand?

As the manufacturer of carburetors, camshafts, cylinder heads, and more, Edelbrock has built a trusted reputation amongst classic car owners across the nation. There’s a reason the company calls itself ” the most respected name in performance.”

Leave a Reply

Your email address will not be published. Required fields are marked *