FAQ: How Do I Identify My Tecumseh Carburetor?

How do I know what model Tecumseh carburetor I have?

The model number (marked with red box in photo) on a Tecumseh engine can be found on the engine ID label, typically located under the engine cover.

Are Tecumseh carburetors interchangeable?

Tecumseh carbs often have similar connections for linkages, similar bolt patterns for mounting, and similar construction, so there is a good chance that you will find a different one that will fit, and if it’s off of a similar sized engine, it will probably work.

Where is the part number on a carburetor?

The list number is stamped on your carburetor, either on the corner of the airhorn or choke tower or, if it doesn’t have an airhorn, on the mainbody. Remove the carburetor from your vehicle before looking for the list number to easily find the information you need.

Who makes Tecumseh small engines?

In short, Tecumseh engines and parts are currently manufactured by LCT, CPC and Lauson Engines.

How can I tell how old my Tecumseh engine is?

Look for the engine model number. You may find it stamped on the blower housing or on an engine identification label located on the front or top of the engine or under the engine cover. Find the date-of-manufacture code, usually found near the abbreviation “D.O.M.” or at the end of the engine model number.

You might be interested:  Often asked: What Causes Carburetor Dieseling?

When did they stop making Tecumseh Engines?

Tecumseh engine products at one time were sold in over 120 countries. In December 2008, the company closed its engine manufacturing division.

Are carburetors interchangeable?

Answer: The most common answer is that is has to be tuned to match your engine. Rarely will a new carburetor work right out of the box and some tuning will be required. The adjustment method can differ with the carburetor type, but the general progression is the same.

How do I know what Rochester carburetor I have?

All Rochester Quadrajet carburetors are identified by a seven- or eight-digit GM part number. On units made before mid-1968, the part number was stamped around the outside edge of a round metal tag attached to the fuel bowl.

How do I find out what year my snowblower is?

Refer to the next 7 pictures of snow blowers manufactured by MTD.. On Murray-made machines, there is a Date Code that is usually 4 digits, where the first digit identifies the Year (you need an idea of the decade, mostly 1990s) and the last 3 digits identify the sequential day within the year.

What happened to Tecumseh Motors?

Tecumseh engine products at one time were sold in over 120 countries. In December 2008, the company closed its engine manufacturing division. Tecumseh Power sold off its Peerless transmissions business to Husqvarna Outdoor Products.

Leave a Reply

Your email address will not be published. Required fields are marked *